This is my first ever attempt at creating my own 3D printable object. I used the Stackable Box V4 by YTuan4114 as a base and I have adjusted it to be larger and have straight edges, as that was what I wanted for my own storage container (Original file: https://www.thingiverse.com/thing:647425).
This container is specifically made to be used with the IKEA Skadis board in combination with the holder/clips from mhson, found here: https://www.thingiverse.com/thing:2535294
You can choose to either hang it on 2 or 4 of these clips, but I strongly recommend using 4 whilst having the longer side towards the board (see pictures). As the boxes are stackable, you can of course also use them without the IKEA Skadis, just as storage containers.
I have tested the container with multiple different items and weights, and I think it can hold quite a bit of weight before deforming (when using 4 clips). My main goal with these containers is to store electronics like buttons, potmeters and other stuff for my Arduino projects, but I have also tried putting my soldering gear in it (including the soldering iron) and it held up pretty well.
I hope someone will enjoy this.
| Stackable_Box_Remix_-_IKEA_Skadis_Compatible.stl | 21.8KB |
