This is a dray tray for the Ikea RINNIG sponge holder
https://www.ikea.com/om/en/p/rinnig-kitchen-ut-rck-plate-hldr-dsh-drnr-s79323709/?utm_source=google&utm_medium=surfaces&utm_campaign=shopping_feed&utm_content=free_google_shopping_clicks_Cooking&gad_source=1&gclid=CjwKCAjww_iwBhApEiwAuG6ccJYfbIbCmyC5PGw-DJWG82iQpvKLX8IY3F5y8GDuEkQfk2OPM-NTqBoCxw0QAvD_BwE
I created 2 trays one with a drain which i have used to drain into my sink and another one without a drain if you want to place it under the sponge holder and not spill water on near the sink.
I have also split up the tray into two so it can print on 90% of printers out there. but if you have a bigger printer you will be able to print it in one piece
| Tray_-_Drain_-_Left.stl | 256.7KB | |
| tray_-_Drain_-_right.stl | 521.3KB | |
| Tray_-_No_drain_-_full.stl | 197.4KB | |
| Tray_-_No_drain_-_full_.3mf | 65.8KB | |
| Tray_-_No_drain_-_half.stl | 110.2KB | |
| tray_-_No_Drain_-_half__.3mf | 36.8KB |
