Ikea Markus Chair Headphone Holder 3D Printer Model
The file 'Ikea Markus Chair Headphone Holder 3D Printer Model' is (stl) file type, size is 234.59 KB.
The file 'Ikea Markus Chair Headphone Holder 3D Printer Model' is (stl) file type, size is 234.59 KB.
EDIT: Uploaded V2 - Re-Designed the hook to fit on the armrest on the cushion side, not from the outside. This will eliminate the chance of the hook not being tight enough due to a print not having perfect dimensional accuracy, warpage. It will also stop the hook from falling off over time due to wiggling, or the chair turning suddenly. Both things the older design was limited by. Please enjoy this updated version.
This newer design requires you to remove the two ikea hex key bolts and removing your armrest, sliding the headphone hook on the armrest and re-installing the hex bolts. Installation took me less than two minutes.
A great spot to store headphones on your Ikea Markus Chair. In my case -HyperX Cloud II Headphones.
The gap for the headphones is 19.5 mm tall. It was made to fit the padding on the HyperX Cloud. It will fit headphones that are about 45mm wide.
| Markus_Headphone_Holder_v2.0_Install.stl |
