Ikea Lack Table Leg Bracket 3D Printer Model
The file 'Ikea Lack Table Leg Bracket 3D Printer Model' is (stl) file type, size is 87.60 KB.
The file 'Ikea Lack Table Leg Bracket 3D Printer Model' is (stl) file type, size is 87.60 KB.
I noticed my Ikea Lack table was a bit wobbly, so I designed this bracket.
You will need 4 brackets in total, one for each leg. They are designed for size 6 screws, with enough holes for 7 in each bracket, which is definitely overkill, so you can probably get away with fewer.
I have included models that have the following on each hole:
-An 82 degree countersink, designed for standard wood screws.
-A more shallow countersink, designed for drywall screws.
-No countersink, designed for normal pan head screws.
These brackets paired with a foam mat below the table have reduced vibration caused by the printer almost entirely.
| IKEA-LACK-BRACKET-82CSK.stl |
| IKEA-LACK-BRACKET-DRYWALL-SCREWS.stl |
| IKEA-LACK-BRACKET-NO-CSK.stl |
