Ikea Lack Table – Aldis Leg Adapter 3D Printer Model
The file 'Ikea Lack Table – Aldis Leg Adapter 3D Printer Model' is (stl) file type, size is 64.0KB.
The file 'Ikea Lack Table – Aldis Leg Adapter 3D Printer Model' is (stl) file type, size is 64.0KB.
UPDATE 9/6/16:
Minor tweaks. Increased the thickness of the walls on top, aligned the inside edges properly. Should print fine now with a wall thickness of 1mm
UPDATE 9/5/16:
I've done some test prints and fittings. I've altered the top of the adapter so the top legs will sit directly on the bottom LACK. I've also adjusted the measures slightly so it fits the Aldis legs better.
ORIGINAL:
I'm planning to use the Ikea Lack table to create an enclosure for my Monoprice Maker Select v2, but I wanted the first shelf to be higher so I can fit more stuff underneath. Since I had a bunch of extra Ikea Aldis legs available, I designed this adapter to slip over the corners of the Lack Table and allow the Aldis legs to be screwed in. And then there is a square on top to allow another Lack Table to just sit above it. The adapter can be screwed into the Lack table from above.
So the idea is the Aldis legs w/ the adapter replace the standard legs. And then you can just place another Lack table above the modified one.
| Ikea_Lack_Table_Leg_Adapter.stl | 757.5KB |
