IKEA LACK Stacking Adapter & Leg Extension 3D Printer Model
The file 'IKEA LACK Stacking Adapter & Leg Extension 3D Printer Model' is (stl) file type, size is 822.7KB.
The file 'IKEA LACK Stacking Adapter & Leg Extension 3D Printer Model' is (stl) file type, size is 822.7KB.
This is a set of adapters, mounts and a leg extension for the IDEA LACK table. The set has two main uses:
1) Extend the legs of the table to increase the height, e.g. to fit a printer underneath
2) Allow tables to be stacked with stacking adapters
Stacking adapters
The stacking is based on a half sphere ball (bottom part) and a matching hole (top part). The top part is designed so that the table can also stand on it on any flat surface.
The upper part adds 15 mm height and the lower part adds 5 mm.
Leg extension
The leg extension consists of a hollow leg with cross cuts for enhanced stiffness and minimal filament usage.
There are two end parts to be used for the leg:
1) A leg mount that can be screwed to the table leg or onto the surface the leg should stand on
2) A stacking adapter that fits onto the normal bottom part adapter
The STL for the leg extension has 10cm, scale the height as needed.
| Adapter_Mount_Bottom.stl | 1.7MB | |
| Adapter_Mount_Top.stl | 1.7MB | |
| Leg_10cm.stl | 93.3KB | |
| Leg_Adapter_Top.stl | 2.2MB | |
| Leg_Mount.stl | 2.7MB |
