Ikea Lack Grommet 3D Printer Model
The file 'Ikea Lack Grommet 3D Printer Model' is (stl) file type, size is 2.8MB.
The file 'Ikea Lack Grommet 3D Printer Model' is (stl) file type, size is 2.8MB.
If you print it out please remember to share your make. It's always good to how other people have used the models :) Thanks!
This was designed for use on an IKEA Lack table allowing you to cut a various sizes of holes in the table and inset the grommet. Just choose your size for what you need and get printing! I used the grommet in my 3D printer enclosure but could be used anywhere. Check that out here: http://www.thingiverse.com/thing:2212749
A square version can be found here: http://www.thingiverse.com/thing:2265185
Updated (12/04/2017) - I have added all metric sizes in relation to the hole cutter linked below. All grommets are set to be 53mm deep.
Metric - 25, 32 ,38 ,45 ,50 ,56 ,62mm
Updated (22/04/2017) - I have added all imperial sizes in relation to the hole cutter linked below. All grommets are set to be 53mm deep
Imperial - 3/4", 7/8", 1 1/8", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/2", 3", 3 1/2", 4", 5”
| Ikea_Lack_Grommet_-_1_1-2.stl | 465.8KB | |
| Ikea_Lack_Grommet_-_1_1-4.stl | 489.9KB | |
| Ikea_Lack_Grommet_-_1_1-8.stl | 489.3KB | |
| Ikea_Lack_Grommet_-_1_3-4.stl | 445.2KB | |
| Ikea_Lack_Grommet_-_2.stl | 455.6KB | |
| IKEA_Lack_Grommet_-_210mm.stl | 944.6KB | |
| Ikea_Lack_Grommet_-_25mm.stl | 463.9KB | |
| Ikea_Lack_Grommet_-_2_1-2.stl | 406.4KB | |
| Ikea_Lack_Grommet_-_3-4.stl | 436.5KB | |
| Ikea_Lack_Grommet_-_3.stl | 401.6KB | |
| Ikea_Lack_Grommet_-_32mm.stl | 490.3KB | |
| Ikea_Lack_Grommet_-_3_1-2.stl | 405.0KB | |
| Ikea_Lack_Grommet_-_4.stl | 406.0KB | |
| Ikea_Lack_Grommet_-_45mm.stl | 446.2KB | |
| Ikea_Lack_Grommet_-_5.stl | 400.2KB | |
| Ikea_Lack_Grommet_-_50mm.stl | 467.2KB | |
| Ikea_Lack_Grommet_-_56mm.stl | 432.7KB | |
| Ikea_Lack_Grommet_-_62mm.stl | 426.5KB | |
| Ikea_Lack_Grommet_-_7-8.stl | 459.3KB | |
| IKEA_Lack_Grommet_-_71.6mm.stl | 1.2MB |
