IKEA LACK ENCLOSURE V2 3D Printer Model
The file 'IKEA LACK ENCLOSURE V2 3D Printer Model' is (stl,zip) file type, size is 77.0MB.
The file 'IKEA LACK ENCLOSURE V2 3D Printer Model' is (stl,zip) file type, size is 77.0MB.
Build Log:
10/2/2018: Updated parts with correct heights and corrected model splitting properly in Slic3r. Shortened file names for easier viewing in Thingiverse.
06/02/2018: All the parts have now been uploaded with the correct tolerances. Happy printing. :) As always just ping me if you have any issues or need a different size.
2/3/2018: Noticed an issue in the thread of the model. My mirrored parts have the opposite thread! Not an issue if you match the sides up correctly but still strange enough I want to fix. The test print has this issue. Revising the design slightly to have a beeter fit. Its tight in PLA so think ABS might be an issue with shrinkage. Anyone care to test?
1/2/2018: Looking for help: I need some to print a test of the 2 test parts to see if they fit together properly using another 3D printer. If someone can test and post a pic and pass comments that would be great. Print "Test Fit.stl" and see if it screws together properly. DONE!
https://www.youtube.com/watch?v=iGKDOs6fW4Y
This is a remix of my last model with some improvements. The plan is to provide versions for 3,4,5 & 6mm plexiglass as many of you have requested this. I also plan on increasing the internal floor space slightly bringing the glass closer to the edge. In addition I'm redesigning the leg extensions so they can be printed as a separate parts should you wish to re-use/change these in the future. I'll be looking for some test printers if anyone is interested.
Various Options:
1 - Back legs are a duplicate of each other
2 - Front legs have 3 options.
A - Slots for perspex that is removable
B - Backstops for a potential swing door
C - Blank for space at the front (potential other door option)
File Format - "Total Internal Height" x "Perspex Thickness".stl
Note: You don't need to use or print the extentions. If you dont the total internal clearance will be 460mm.
Total Internal Clearance - This will be the final internal height once you put all the parts together.
Perspex Thickness - This is the thickness of the perspex that can be used with the stl.
| ADALAN_IKEA-LE_V2_550mm_x_2mm.stl | 4.9MB | |
| Camera_Roll.zip | 3.4MB | |
| IKEA-LE_V2_500mm_x_13mm.stl | 9.0MB | |
| IKEA-LE_V2_500mm_x_2mm.stl | 9.0MB | |
| IKEA-LE_V2_500mm_x_3mm.stl | 8.8MB | |
| IKEA-LE_V2_500mm_x_4mm.stl | 8.8MB | |
| IKEA-LE_V2_500mm_x_5mm.stl | 8.8MB | |
| IKEA-LE_V2_500mm_x_6.5mm.stl | 9.0MB | |
| IKEA-LE_V2_500mm_x_6mm.stl | 8.8MB | |
| IKEA-LE_V2_500mm_x_7mm.stl | 9.0MB | |
| IKEA-LE_V2_550mm_x_13mm.stl | 8.9MB | |
| IKEA-LE_V2_550mm_x_2mm.stl | 8.9MB | |
| IKEA-LE_V2_550mm_x_3mm.stl | 8.7MB | |
| IKEA-LE_V2_550mm_x_4mm.stl | 8.7MB | |
| IKEA-LE_V2_550mm_x_5mm.stl | 8.7MB | |
| IKEA-LE_V2_550mm_x_6.5mm.stl | 8.9MB | |
| IKEA-LE_V2_550mm_x_6mm.stl | 8.7MB | |
| IKEA-LE_V2_550mm_x_7mm.stl | 8.9MB | |
| IKEA-LE_V2_600mm_x_13mm.stl | 8.4MB | |
| IKEA-LE_V2_600mm_x_2mm.stl | 8.4MB | |
| IKEA-LE_V2_600mm_x_3mm.stl | 8.2MB | |
| IKEA-LE_V2_600mm_x_4mm.stl | 8.2MB | |
| IKEA-LE_V2_600mm_x_5mm.stl | 8.2MB | |
| IKEA-LE_V2_600mm_x_6.5mm.stl | 8.4MB | |
| IKEA-LE_V2_600mm_x_6mm.stl | 8.2MB | |
| IKEA-LE_V2_600mm_x_7mm.stl | 8.4MB | |
| Test_Print.stl | 3.1MB |
