Original remix can be found here:
https://www.thingiverse.com/thing:2212749
And "seamless" idea of the leg extensions can be found here:
https://www.thingiverse.com/thing:2524700
Drill jig can be found here (also uploaded here):
https://www.thingiverse.com/thing:2117852
Hi there!
Things I changed from the original:
-- I wanted to maximise the space within the lack enclosure so I shifted out the perspex slots to as far as possible to the outside edge as I could, while also maintaining structural integrity.
-- Also here in New Zealand we have slightly different sizes of perspex - I opted for 6mm and so have resized to that also.
-- I wasn't a huge fan of the little 'dimple' that held the perspex in place either, so I opted for a little 6mm knotch (or step?) that will hold the perspex in place instead. You can cut that knotch into the perspex using a dremel.
-- Lastly, I really liked the seamless look of this leg extension:
https://www.thingiverse.com/thing:2524700
So that has also been incorporated into the design.
Cheers and hit me up with any issues/questions!*
Jerry_nz
-- As per request I made a version that holds 2.032mm perspex. These are labelled as "2mmPerspex"
-- I also relabelled the original files that hold 6mm perspex to "6mmPerspex"
-- As per request I made a version that holds 5mm perspex. These are labelled as "5mmPerspex"
-- As per request I made a version that holds 3mm perspex. These are labelled as "3mmPerspex"
-- As per request I made a version that holds 5mm perspex and is 100mm in height. These are labelled as "5mmX100mmPerspex_" ... I really need to think about my naming conventions...
-- Added a quick apology - i'm no longer able to provide STL's with different measurements. cheers!
| 2mmPerspex_bottom_leg_outter__back__printTwo__v02.stl | 853.0KB | |
| 2mmPerspex_bottom_leg_outter__frontLeft__printOne__v02.stl | 779.6KB | |
| 2mmPerspex_bottom_leg_outter__frontRight__printOne__v02.stl | 779.6KB | |
| 2mmPerspex_top_back__printTwo__v02.stl | 639.2KB | |
| 2mmPerspex_top_front_left__printOne__v02.stl | 457.1KB | |
| 2mmPerspex_top_front_right__printOne__v02.stl | 359.9KB | |
| 3mmPerspex_bottom_leg_outter__back__printTwo__v02.stl | 853.4KB | |
| 3mmPerspex_bottom_leg_outter__frontLeft__printOne__v02.stl | 779.8KB | |
| 3mmPerspex_bottom_leg_outter__frontRight__printOne__v02.stl | 779.8KB | |
| 3mmPerspex_top_back__printTwo__v02.stl | 639.2KB | |
| 3mmPerspex_top_front_left__printOne__v02.stl | 454.7KB | |
| 3mmPerspex_top_front_right__printOne__v02.stl | 359.9KB | |
| 5mmPerspex_bottom_leg_outter__back__printTwo__v02.stl | 854.1KB | |
| 5mmPerspex_bottom_leg_outter__frontLeft__printOne__v02.stl | 780.1KB | |
| 5mmPerspex_bottom_leg_outter__frontRight__printOne__v02.stl | 780.1KB | |
| 5mmPerspex_top_back__printTwo__v02.stl | 639.2KB | |
| 5mmPerspex_top_front_left__printOne__v02.stl | 454.4KB | |
| 5mmPerspex_top_front_right__printOne__v02.stl | 359.9KB | |
| 5mmX100mmPerspex_bottom_leg_outter__back__printTwo__v02.stl | 916.1KB | |
| 5mmX100mmPerspex_bottom_leg_outter__frontLeft__printOne__v02.stl | 878.6KB | |
| 5mmX100mmPerspex_bottom_leg_outter__frontRight__printOne__v02.stl | 878.5KB | |
| 6mmPerspex_bottom_bottom_leg_outter__frontLeft__printOne__v02.stl | 781.7KB | |
| 6mmPerspex_bottom_leg_outter__back__printTwo__v02.stl | 854.2KB | |
| 6mmPerspex_bottom_leg_outter__frontRight__printOne__v02.stl | 781.7KB | |
| 6mmPerspex_top_back__printTwo__v02.stl | 639.2KB | |
| 6mmPerspex_top_front_left__printOne__v02.stl | 359.9KB | |
| 6mmPerspex_top_front_right__printOne__v02.stl | 454.2KB | |
| drill_jig.stl | 140.0KB | |
| lowerLeg_printFour_v01.stl | 248.6KB |
