Ikea Lack Drawer Hangers For Trofast Storage Bin 3D Printer Model
The file 'Ikea Lack Drawer Hangers For Trofast Storage Bin 3D Printer Model' is (stl) file type, size is 2.44 KB.
The file 'Ikea Lack Drawer Hangers For Trofast Storage Bin 3D Printer Model' is (stl) file type, size is 2.44 KB.
Use an Ikea Trofast storage bin as a drawer for a Lack table. These are drawer hangers for the Ikea Trofast storage bin. Designed to be mounted to the bottom of an Ikea Lack table using 5x60mm screws from Ikea Fixa screw and plug set. Designed and tested to not punch through the surface of a Lack table. Please measure any other table's thickness before drilling into it. Use 5+ hangers for best results.
UPDATE 2-2-18: Increased offset from 2 to 3mm.
Overhangs are 45 degrees
Screw hole is 5.2mm in diameter
overall dimensions 28mm x 14mm x 28mm
Prints as is, no need for rotation, rafts, or supports
| trofast_bracket_14.stl |
