Simple leg joiner. I designed this because I'haven't found one for the open ended legs.
2 versions:
1) 9 holes for screws (8 outside, 1 in the uncut leg)
2) 5 holes for screws (4 outside, 1 in the uncut leg)
Whats needed:
Screws, 5/9 pcs 4×16mm DIN 7982
Drillbit, diameter 2mm
Assembly:
1) Drill a hole in the uncut leg, use the printed joiner for positioning
2) Use a screw to tighten the joiner
3) Push the legs together
4) Drill 4/8 holes for the screws
5) Tighten all the screws
6) Repeat on all legs :)
| LACK_Leg_Join_2x2.stl |
| LACK_Leg_Join_2x4.stl |
