IKEA Lack Cabinet For 3D Printer And Other Things Or Machines 3D Printer Model
The file 'IKEA Lack Cabinet For 3D Printer And Other Things Or Machines 3D Printer Model' is (stl,123dx,stp) file type, size is 3.6MB.
The file 'IKEA Lack Cabinet For 3D Printer And Other Things Or Machines 3D Printer Model' is (stl,123dx,stp) file type, size is 3.6MB.
Had the wonderful idea of a custom cabinet for my 3D printer. Size is to high for regular Lack, so I will extend the feet with the feet from the second LACK.
Results in 2-level-cabinet. Printer is up, below some filament or other things will find place.
uses
50x70:
103.003.76 green
502.979.61 black
603.003.74 white
903.003.77 blue
302.979.62 pink
40x50:
403.003.89 green
502.956.55 black
003.003.86 white
203.003.85 blue
302.956.61 pink
a few connectors (from sheet metal or some of the nice things on thingiverse) to connect the tables to each other
what you'll need:
2 hinge per picture frame to get doors or 4 edge caps to screw it fixed on the sides and not to open.
Ich habe mir überlegt, meinen 3D-Drucker in eine Vitrine zu stellen. Aufgrund der Bauhöhe reicht der normale LACK Tisch nicht aus, der muss mit abgesägten Füßen verlängert werden.
Kürzt man die verbliebenen Stümpfe noch weiter ein, so ergibt sich dann eine Vitrine mit 2 Ebenen, oben den Drucker und unten diversen anderen Krempel, der dazu gehört.
Um die Vitrine seitlich rundherum zu schließen bietet sich der Bilderrahmen mit PVC-Einlage an. Die Bauhöhe des Rahmens ist gerade mal 12mm, es kann keine Scheibe zu bruch gehen.
IKEA LACK stacking feet
http://www.thingiverse.com/thing:1418251
Printer Housing with Exhaust
http://www.thingiverse.com/thing:1845322
addon for ikea lack box
http://www.thingiverse.com/thing:1876315
IKEA Lack Stacking Feet
http://www.thingiverse.com/thing:1651356
Brackets for upcycled Lack table enclosure
http://www.thingiverse.com/thing:1258633
Ikea Lack Printer Enclosure Risers and Brackets
http://www.thingiverse.com/thing:1609129
Ikea Lack Extension
http://www.thingiverse.com/thing:1667745
Mounting Angles for IKEA Lack Tables
http://www.thingiverse.com/thing:1904945
IKEA Lack Table Leg Brace
http://www.thingiverse.com/thing:1033845
Ikea LACK table stack coupler - Version A
http://www.thingiverse.com/thing:948648
Ikea Lack Extensions With Screwholes
http://www.thingiverse.com/thing:1691647
Ikea LACK connection kit
https://www.thingiverse.com/thing:2627322
| clip_cover_easier_to_close.stl | 419.0KB | |
| clip_cover_with_flap_easier_to_close.stl | 349.1KB | |
| clip_set_curve_-_screw_shift.stl | 1.2MB | |
| clip_set_flap_-_screw_shift.stl | 1.0MB | |
| clip_snap_set.stl | 291.7KB | |
| connector.stl | 102.3KB | |
| corner_snap-clip_connector.stl | 962.2KB | |
| corner_snap-clip_connector2.stl | 184.6KB | |
| Drilling_template.stl | 1.4MB | |
| Fiskbo_40x50.stl | 32.9KB | |
| Fiskbo_50x70.stl | 49.5KB | |
| fiskbo_basis.123dx | 323.3KB | |
| hinge_set_curve.stl | 2.1MB | |
| hinge_set_flap.stl | 2.0MB | |
| Lack.stl | 39.3KB | |
| preview_step.stp | 4.9MB | |
| zuhaltung_fasen.stl | 190.2KB |
