Ikea Kallax Wine Rack Supports 3D Printer Model Free Download

3D Printer Models

Ikea Kallax Wine Rack Supports 3D Printer Model

Author: @awgas

License: CC BY-NC-SA

File formats: stl

Download type: zip

Size:4.8KB

The file 'Ikea Kallax Wine Rack Supports 3D Printer Model' is (stl) file type, size is 4.8KB.

Description Files (1)

Summary

Printed with supports (removed with needlenose pliers).
wall & base thickness 1mm
10% fill

Other supplies needed:

Square wooden rods - 10x 3/8" x 3/8" x 18"*

Optional for a back:
Back Braces:

2x 1/4" x 1/4" x 18"* (one of them cut in half to fit with the other in a cross shape).
Back Stop:
2x 1/4" x 2" wide x 13.25" pieces to place vertically between the back pieces of wood to keep the bottles from going in too far.
2x 1/4" x 2" wide x 6.125" pieces to be glued between the two vertical pieces (like an "H" with two cross pieces)

*Length of rods may vary from ~18-18.5" depending on how you cut the angle. Measure your own before cutting.

Pictured model had a custom design built into the circle, attached STL has a blank circle. Paint your own design in the middle or import the STL into TinkerCad (web based & easy) to add your own shape.

WineRack_-_Blank_Round.stl

27.8KB

Ikea Kallax Wine Rack Supports 3D Printer Model

Summary

Tags

You might also like