Description
This spare part is for the IKEA ihändig spice grinder. There are at least two options. One option is to make the ceramic discs as a separate part that snaps into another part. This other part fails over time. Part of version 2 is intended for this type of mill.
Print instructions
Printing is best done with a high infill (40%), layer height of 0.15mm and a minimum perimeter of 4. Supports are needed only for the very top edge. Where threads are not needed. To do this, you can adjust the degree of overhang angle in the slicer. I printed with PETG material
| ikeagrinder_v1.step | 305.6KB | |
| ikeagrinder_v2.f3d | 1.2MB | |
| ikeagrinder_v2.stl | 1.5MB |
