Iguana Painting 3D Printer Model
The file 'Iguana Painting 3D Printer Model' is (stl) file type, size is 37.2MB.
The file 'Iguana Painting 3D Printer Model' is (stl) file type, size is 37.2MB.
It is better to use non-glossy plastic. You can also lower the temperature for a matte finish.
After the first layer, you can lower the flow_rate to even out and eliminate all overextrusions.
First layer height 0.20mm then 0.08mm for all other.
Filament color:
0 - black
9 - violet
12 - red
13 - blue
16 - green
19 - lime
22 - purple
24 - beige
28 - white-phosphorescent
210 x 210 x 3mm ~ 10hours
105 x 105 x 3mm (50% x 50% x 100%) ~ 4 hours
Photo:
Other works:
| Iguana_-_Totemic3D.stl | 84.3MB | |
| Prime_Tower.stl | 105.4KB |
