IFlight Nazgul GPS Antenna Mount Bottom Plate 3D Printer Model
The file 'IFlight Nazgul GPS Antenna Mount Bottom Plate 3D Printer Model' is (stl) file type, size is 306.5KB.
The file 'IFlight Nazgul GPS Antenna Mount Bottom Plate 3D Printer Model' is (stl) file type, size is 306.5KB.
Remix for attachment to the bottom plate
This is a GPS/Crossfire mount for the iFlight Nazgul Evoque FPV drone bottom plate. It replaces the stock TBS crossfire immortal T antenna mount and uses the frame spacers imbedded in said antenna mount. This is an early work in progress that I have printed and fitted onto my Evoque. I'll update this as I test and adjust the fitment.
-Ender 3 pro with a microswiss direct drive extruder
-.4mm nozzle
-Ninjaflex TPU @ 235c, 55c bed, 100% cooling@ layer 2, 18mm/s print speed,
1mm retraction @ 20mm/s
-prints fine with no supports
12/26/21 Update: I've been using the first one I printed to this day and don't see a need to change anything. I've taken my Evoque out to 2miles, smashed it against a few fences and the ground pretty hard, and the print just takes the use and abouse with no issues.
Print Settings
Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
only unter the flying end parts where the rods go in
Resolution:
.12
Infill:
20-50%
Filament brand:
NinjaFlex
Filament color:
any
Filament material:
TPU
| iflight_gps_mount_bottom.stl | 937.7KB |
