ID Badge Holder 3D Printer Model Free Download

3D Printer Models

ID Badge Holder 3D Printer Model

Author: @LogicGeek

License: CC BY-NC-SA

File formats: stl

Download type: zip

Size:23.9KB

The file 'ID Badge Holder 3D Printer Model' is (stl) file type, size is 23.9KB.

Description Files (1)

Summary

Purpose

I needed a new badge holder for work, so I turned out a reproduction of a busted holder from a co-worker. The dimensions should allow for two cards (snugly) on one side, and one card on the other..

I recommend the "horizontal" print orientation as noted in the "Print Settings" section.

Changelog

v1.0: Initial Release
v1.2: Fixed some dimensional inaccuracies in the spacing of the card slot.
v1.3: Final fit of 1.2 was successful, but could be too snug if using materials with any contraction in the print. Added another .25 mm tolerance for the internal length.
v1.4: Structural support added to the main body. I was a bit too aggressive in removing supports from a print and noticed a seam which could use some work (because, you see, I broke it).
v1.5: Added back the missing tension strips on the back face of the model.
v1.6: Fixed spacing on one set of the tabs.

Once I get a basic comfort level with Fusion 360, I'll add a model in which I will fillet all edges and round out the outer corners to soften out the pokey bits.

ID_Badge_Holder_v1.6.stl

122.9KB

ID Badge Holder 3D Printer Model

Summary

Purpose

Changelog

Tags

You might also like