ICOM IC-E90 Battery Packs 3D Printer Model
The file 'ICOM IC-E90 Battery Packs 3D Printer Model' is (stl,FCStd) file type, size is 2.1MB.
The file 'ICOM IC-E90 Battery Packs 3D Printer Model' is (stl,FCStd) file type, size is 2.1MB.
Battery compartments for ICOM IC-E90 (FM transceiver).
Combined with standard rechargeble batteries these replace the original battery packs BP-216 / BP-217.
Requires that you make the contacts (e.g. from a tin can) and glue / solder them into the compartments.
There are 3 variants:
Each consists of a body and a matching lid. The lid is optional for the 2x18500 and 4xAA variants.
Note that the IC-E90 reduces the transmitting power when operated below 6V. Thus only with the 2x18500 and 6xAA variants you can obtain full tx power.
| Body_2x18500.stl | 44.0KB | |
| Body_4xAA.stl | 76.9KB | |
| Body_6xAA.stl | 108.3KB | |
| ICOM-IC-E90-BatteryHolder.FCStd | 2.1MB | |
| Lid_2x18500.stl | 3.8KB | |
| Lid_4xAA.stl | 5.4KB | |
| Lid_6xAA.stl | 16.1KB |
