By popular demand I made a cover for the IC-705 mounted in the WindCamp frame. The cover slides straight down over the front of the radio and clips into the WindCamp frame handles. To release, press the clips inward with your fingers and lift the cover. The cover should also be removable by lifting straight away from the radio with some force.
Similar to https://www.thingiverse.com/thing:6502826.
Make sure the STL files are arranged as shown when printing for best results. Print two clips.
You will need to glue the clips onto the cover after printing. The top of the clip mount should be flush with the top of the cover as shown. It is a tight fit into the recess in the cover, you might need to sand one edge of the clip down to allow the fit.
| Cover_Clip.stl | 132.0KB | |
| WA_IC705_Cover_R1.stl | 259.5KB |
