Hi, i would like to show you my ice racer. I used my old rc parts. It is very cheap and easy
to build so i really recommend it.
Parts which i used:
3 plsatic bottles
Approximately 3m 6x10mm lumber
3d printed parts
2450 kv 2212 motor
8 inch prop
~ 20 grams servo
3,5 and 6 mm rod
30A ESC
Motor should be slower and prop and ESC should be bigger but i had this parts and they working so
i leave it as it is. Steering mechanism could be better too but it is fairly good.
Build it remix it and have fun :)
| 45_template_big.stl | 4.8KB | |
| 45_template_small.stl | 4.8KB | |
| bottle_mount.stl | 106.9KB | |
| case_battery.stl | 7.3KB | |
| case_ESC.stl | 5.4KB | |
| corner.stl | 3.0KB | |
| corner_big.stl | 3.0KB | |
| cover_battery.stl | 3.8KB | |
| cover_ESC.stl | 140.3KB | |
| FlapL.stl | 97.4KB | |
| FlapR.stl | 97.4KB | |
| gopro_mount1.stl | 133.3KB | |
| gopro_mount2.stl | 3.2MB | |
| Ice_Racer.stl | 11.8MB | |
| servo.stl | 110.0KB |
