Hyundai Tucson Stand 3D Printer Model
The file 'Hyundai Tucson Stand 3D Printer Model' is (stl) file type, size is 42.7KB.
The file 'Hyundai Tucson Stand 3D Printer Model' is (stl) file type, size is 42.7KB.
Baúl para las llaves (o lo que se te ocurra) para el Hyundai Tucson del 2019, supongo que servirá para otros modelos pero lo he comprobado, no tengo tantos coches xD
Esta pieza se coloca en el agujero grande que está a la derecha del freno de mano.
Se puede poner tanto en izquierda a derecha como de adelante a atrás, esto es al gusto.
Se compone de 3 piezas y 2 imanes de neodimio de 5mm.
La base se imprimirá CON soporte, para hacer bien la guÃa del cilindro. La tapa y el cilindro sin soporte.
Las 3 piezas tendrán 20% de relleno.
Una vez unidas las 3 piezas yo lo pinté de color negro y con laca Nelly lo laqué, 2 capas.
Trunk for the keys (or whatever you can think of) for the 2019 Hyundai Tucson, I suppose it will work for other models but I have checked, I don't have that many cars xD
This piece fits into the large hole to the right of the handbrake.
It can be placed either from left to right or from front to back, this is to taste.
It consists of 3 pieces and 2 5mm neodymium magnets.
The base will be printed WITH support, to make the cylinder guide well. The cap and cylinder without support.
The 3 pieces will have 20% infill.
Once the 3 pieces were joined, I painted it black and lacquered it with Nelly lacquer, 2 coats.
| Base.stl | 111.3KB | |
| Cilindro.stl | 25.1KB | |
| Tapa.stl | 70.9KB |
