Made to fit picatinny rails (it's a bit tight on some rails, you may need to sand it a bit to get it to fit, I will upload a modified version asap).
EDIT : added 2B_GLP_Body_V2 the rail adaptor is a bit bigger and should fit better
You will need m3 bolts and nuts and a small spring.
It fires madbull shotgun shells.
Have fun with it :)
(tip me if you like my work, this way I can repair my printer and offer you even better projects)
How to put it together, see picture of 3D model :
Assemble the trigger (red parts) through the receiver with a m3 screw.
Put light green part inside the hole, place the dark green parts on the side, screw through the 3 parts, add the spring and close with the plate (blue part) and 2 screws.
1_GLP_Barrel.stl | 115.8KB | |
2B_GLP_Body_V2.stl | 86.0KB | |
2_GLP_Body.stl | 100.7KB | |
3_GLP_blokanon.stl | 11.0KB | |
4_GLP_Targette01.stl | 15.1KB | |
5_GLP_Targette02.stl | 15.1KB | |
6_GLP_plaque.stl | 24.1KB | |
7_GLP_rondelle.stl | 19.6KB | |
8_GLP_Bouton.stl | 29.4KB |