This is a revised Z-Carriage for the Hypercube 3D Printer. It will let you use 1 LM8LUU instead of using 2 LM8UU Linear Bearings.
Print this with 30% infill with the flat side on the print bed.
The bearing is clamped in with the same clamps tech2c uses and uses 4-M3x15mm nuts and bolts to clamp the bearing, and 2-M5x10mm bolts and t-nuts to connect to the 2020 extrusion.
In my testing, the bed is as rigid by using this single LM8LUU instead of using the double LM8UU version that Tech2C uses, so it can save you money on your build.
| LM8LUU_Z-Carriage-hypercube.STL | 85.4KB |
