Hypercube Evolution Dual Side Idler/Pulley Mount For 8, 10 And 12mm Rod 3D Printer Model
The file 'Hypercube Evolution Dual Side Idler/Pulley Mount For 8, 10 And 12mm Rod 3D Printer Model' is (stl) file type, size is 2.7MB.
The file 'Hypercube Evolution Dual Side Idler/Pulley Mount For 8, 10 And 12mm Rod 3D Printer Model' is (stl) file type, size is 2.7MB.
Reinforced double side idler mount for 8, 10 or 12mm rods with flexible top screw.
Separated to the mount and clamp.
For 30x30 aluminium extrusion.
| XY_Idler_DualMount_alignment_tool_V1.0.stl | 15.1KB | |
| XY_Idler_DualSide_Mount_10mm_-_Left_-_3mm_bearing_Brass_insert_V1.2.stl | 329.2KB | |
| XY_Idler_DualSide_Mount_10mm_-_Left_-_3mm_bearing_Hex_nut_V1.2.stl | 329.6KB | |
| XY_Idler_DualSide_Mount_10mm_-_Left_-_5mm_bearing_Brass_insert_V1.2.stl | 338.3KB | |
| XY_Idler_DualSide_Mount_10mm_-_Left_-_5mm_bearing_Hex_nut_V1.2.stl | 338.7KB | |
| XY_Idler_DualSide_Mount_10mm_-_Right_-_3mm_bearing_Brass_insert_V1.2.stl | 329.2KB | |
| XY_Idler_DualSide_Mount_10mm_-_Right_-_3mm_bearing_Hex_nut_V1.2.stl | 329.6KB | |
| XY_Idler_DualSide_Mount_10mm_-_Right_-_5mm_bearing_Brass_insert_V1.2.stl | 338.3KB | |
| XY_Idler_DualSide_Mount_10mm_-_Right_-_5mm_bearing_Hex_nut_V1.2.stl | 338.7KB | |
| XY_Idler_DualSide_Mount_10mm_Clamp_-_Left.stl | 77.9KB | |
| XY_Idler_DualSide_Mount_10mm_Clamp_-_Right.stl | 77.9KB | |
| XY_Idler_DualSide_Mount_12mm_-_Left_-_3mm_bearing_Brass_insert_V1.2.stl | 330.0KB | |
| XY_Idler_DualSide_Mount_12mm_-_Left_-_3mm_bearing_Hex_nut_V1.2.stl | 330.4KB | |
| XY_Idler_DualSide_Mount_12mm_-_Left_-_5mm_bearing_Brass_insert_V1.2.stl | 339.0KB | |
| XY_Idler_DualSide_Mount_12mm_-_Left_-_5mm_bearing_Hex_nut_V1.2.stl | 339.4KB | |
| XY_Idler_DualSide_Mount_12mm_-_Right_-_3mm_bearing_Brass_insert_V1.2.stl | 330.0KB | |
| XY_Idler_DualSide_Mount_12mm_-_Right_-_3mm_bearing_Hex_nut_V1.2.stl | 330.4KB | |
| XY_Idler_DualSide_Mount_12mm_-_Right_-_5mm_bearing_Brass_insert_V1.2.stl | 332.8KB | |
| XY_Idler_DualSide_Mount_12mm_-_Right_-_5mm_bearing_Hex_nut_V1.2.stl | 339.4KB | |
| XY_Idler_DualSide_Mount_12mm_Clamp_-_Left.stl | 75.9KB | |
| XY_Idler_DualSide_Mount_12mm_Clamp_-_Right.stl | 75.9KB | |
| XY_Idler_DualSide_Mount_8mm_-_Left_-_3mm_bearing_Brass_insert_V1.2.stl | 328.4KB | |
| XY_Idler_DualSide_Mount_8mm_-_Left_-_3mm_bearing_Hex_nut_V1.2.stl | 328.8KB | |
| XY_Idler_DualSide_Mount_8mm_-_Left_-_5mm_bearing_Brass_insert_V1.2.stl | 337.5KB | |
| XY_Idler_DualSide_Mount_8mm_-_Left_-_5mm_bearing_Hex_nut_V1.2.stl | 337.9KB | |
| XY_Idler_DualSide_Mount_8mm_-_Right_-_3mm_bearing_Brass_insert_V1.2.stl | 328.4KB | |
| XY_Idler_DualSide_Mount_8mm_-_Right_-_3mm_bearing_Hex_nut_V1.2.stl | 328.8KB | |
| XY_Idler_DualSide_Mount_8mm_-_Right_-_5mm_bearing_Brass_insert_V1.2.stl | 337.5KB | |
| XY_Idler_DualSide_Mount_8mm_-_Right_-_5mm_bearing_Hex_nut_V1.2.stl | 337.9KB | |
| XY_Idler_DualSide_Mount_8mm_Clamp_-_Left.stl | 77.0KB | |
| XY_Idler_DualSide_Mount_8mm_Clamp_-_Right.stl | 77.0KB |
