Hypercube Evolution Carriage Orbiter 2.0 Mount With Volcano Hotend And 5015 Fan 3D Printer Model
The file 'Hypercube Evolution Carriage Orbiter 2.0 Mount With Volcano Hotend And 5015 Fan 3D Printer Model' is (stl) file type, size is 629.6KB.
The file 'Hypercube Evolution Carriage Orbiter 2.0 Mount With Volcano Hotend And 5015 Fan 3D Printer Model' is (stl) file type, size is 629.6KB.
Since I restarted my 3d printer hobby this year, One of my machines is my old Hypercube Evolution Build from 2019.
Bowden didn't produce great results for me, so I ordered an orbiter 2.0 extruder to eventually convert this printer into a direct extrusion.
Unfortunately, there are not many options that suit my needs so I have to model them myself.
I uploaded two versions of the file. The first one which was printed, have an issue with the fan screw placement so I had to create a second one with a custom-made fan duct.
Extra parts required
Instruction:
Version note
V1 - Prototype that works for me. But the fan mount was off. Please ignore it.
V2 - Update with 5015 fan
V3 - Shorten the mount by 5mm to increase X movement limit
V4 - Decided not to shorten the mount as it will lose Y movement anyway, Added BLtouch
V5 - By moving part cooling fan to the top of the carriage. We restored another 15mm of X-Axis movement.
Please adjust homing sequence to home Y first then X as the Orbiter motor might collide with Y Optical Endstop if it is at X0 before Y is homed.
| 4_BLtouch_Extender.stl | 36.9KB | |
| 4_Duct.stl | 128.0KB | |
| 4_Extruder_Mount.stl | 335.5KB | |
| 5_BLtouch_Extender.stl | 38.8KB | |
| 5_Extruder_Mount.stl | 246.7KB | |
| 5_Jig_PTFE.stl | 25.7KB | |
| 5_Long_Fan.stl | 195.0KB | |
| 5_Y_Endstop.stl | 20.5KB | |
| duct_20.stl | 123.4KB | |
| duct_v3.stl | 133.3KB | |
| extruder_v1_obsolete.stl | 404.8KB | |
| jig_pefe_tube_part_1.stl | 27.0KB | |
| jig_ptfe_tube_part_2.stl | 27.7KB | |
| mount_v21.stl | 358.4KB | |
| mount_v3.stl | 258.8KB | |
| retainer_v2.stl | 57.5KB |
