HYPEBlocks – FRC Clamping Bearing/Gearbox Mounts 3D Printer Model
The file 'HYPEBlocks – FRC Clamping Bearing/Gearbox Mounts 3D Printer Model' is (stl) file type, size is 31.2MB.
The file 'HYPEBlocks – FRC Clamping Bearing/Gearbox Mounts 3D Printer Model' is (stl) file type, size is 31.2MB.
Some of the links on this page are the old version, to download the latest files visit the Onshape document to export the files directly. Any file ending in "_V2" is the new version, but may not be as up to date as the onshape document.
Made by FRC Team 5254 HYPE.
A collection of blocks designed to clamp onto 1x1 tubing to allow mounting of motors and bearings for shafts. Designed to imitate the spacing of a VEX side bearing gusset and allow a variety of options to mount motors, some examples of which are shown in the attached drawing. Screwed together with #8 or #10 hardware, 8-32 or 10-32 x 1 1/4" recommended.
775 style motors use VEX GT2 motor pulleys and belts with a variety of belt sizes (shown in drawing).
Some other useful parts:
Dual motor versions
3D printable GT2 Pulleys
Snap-on 0.5" Hex Spacers
| 1in_550+775_12-72_100T_10-32_V2.stl | 5.3MB | |
| 1in_550+775_12-72_100T_8-32_V2.stl | 5.3MB | |
| 1in_Blank_ThreadedInsert_10-32_V2.stl | 4.7MB | |
| 1in_Blank_ThreadedInsert_8-32_V2.stl | 4.7MB | |
| 1in_CIM+UP_24-60_100T_10-32_V2.stl | 5.9MB | |
| 1in_CIM+UP_24-60_100T_8-32_V2.stl | 5.9MB | |
| 1in_SideBearing_1125Simple_10-32_V2.stl | 5.3MB | |
| 1in_SideBearing_1125Simple_8-32_V2.stl | 5.3MB | |
| 1in_SideBearing_ThriftyBushing_10-32_V2.stl | 5.2MB | |
| 1in_SideBearing_ThriftyBushing_8-32_V2.stl | 5.2MB | |
| HYPEBlock_-_1in_775_Mount.stl | 4.8MB | |
| HYPEBlock_-_1in_775_Side_Bearing_Combo_Mount.stl | 5.0MB | |
| HYPEBlock_-_1in_Blank.stl | 4.5MB | |
| HYPEBlock_-_1in_Side_Bearing_Mount.stl | 4.5MB | |
| HYPEBlock_-_1in_VersaPlanetary_Mount.stl | 5.2MB | |
| HYPEBlock_-_2in_12-36_60T_775_Mount.stl | 6.4MB | |
| HYPEBlock_-_2in_12-72_90T_775_Mount.stl | 6.3MB | |
| HYPEBlock_-_2in_Blank.stl | 5.4MB |
