Hylian Sheild Case For The Nintendo Switch 3D Printer Model
The file 'Hylian Sheild Case For The Nintendo Switch 3D Printer Model' is (stl) file type, size is 4.1MB.
The file 'Hylian Sheild Case For The Nintendo Switch 3D Printer Model' is (stl) file type, size is 4.1MB.
This is a Nintendo Switch carrying case which touches the Switch only on the rails!
I put a Hylian Sheild design on the front for added protection!
Added a Nintendo Switch logo version.
Added a black version in case anyone want to make their own versions.
I have updated the case to now have a slide over top with a hole for the power to plug through! I also updated per many reddit suggestions, made a version with a convex shield.
I am planning on taking my switch on long road trips and wanted something durable to protect my switch. I'm also planning on sewing up a small drawstring bag to wrap it up in.
I will be making a second version a little bit taller so I can put a sliding top on to seal it up with, and also it could be modified to be a more permenant case with a hole for the screen in the back and rails for the joycons on the sides, it slides in upside down. So those are the two modifications I will make, if people want them.
I printed in White Hatchbox PLA at 216C with a 60 Degree Bed on my QIDI Tech I
The Tesselated slide cover must be printed on the side and therefore needs supports when printed!
| MK._II_-_Shield_In.stl | 3.5MB | |
| MK._II_-_Shield_Out.stl | 4.1MB | |
| MK._II_-_Smooth_Top.stl | 223.1KB | |
| MK._II_-_Smooth_Top_WITH_Charging_Port.stl | 412.8KB | |
| MK._II_-_Tesselated_Top.stl | 439.9KB | |
| MK._II_-_Tesselated_Top_WITH_Charging_Port.stl | 593.1KB | |
| Nintendo_Switch_Case.stl | 3.3MB | |
| Nintendo_Switch_Case_Blank.stl | 2.5MB | |
| Switch_Case.stl | 2.7MB | |
| Test_3.stl | 373.8KB |
