Hydroponic Vertical Tower 3D Printer Model
The file 'Hydroponic Vertical Tower 3D Printer Model' is (stl,f3d) file type, size is 5.0MB.
The file 'Hydroponic Vertical Tower 3D Printer Model' is (stl,f3d) file type, size is 5.0MB.
This is a vertical tower for hydroponic. This one is made from a 4inch ABS tube (99,75mm ID x 114,15mm OD) but I recommend you to use PVC. The cups and the holders are a tight fit so the cups won't come off the holders. Those holders are 30 deg angle. For the holes in the ABS tube, I cut them with a 2.5inch hole saw. For water coming on top, I use the one below with a flexible tube. For the foot it's a conic one so more the tube goes down, more it's tight and you'll probably have to sand it to fit at your height
| 2in_Cups.stl | 565.2KB | |
| 30deg_Cups_Holder.stl | 116.0KB | |
| Foot.f3d | 58.1KB | |
| Sortie_4in_OD.stl | 35.4KB | |
| Vertical_Hydroponic_Tower.f3d | 4.7MB |
