Hydroponic Table Trellis With PVC Clamp 3D Printer Model
The file 'Hydroponic Table Trellis With PVC Clamp 3D Printer Model' is (stl) file type, size is 496.8KB.
The file 'Hydroponic Table Trellis With PVC Clamp 3D Printer Model' is (stl) file type, size is 496.8KB.
Remixed the aerogarden trellis for my 2.5" hydroponic grow table, resized, added bolting/zip tie mount, and create PVC clamps for it.
Printed in PLA
(Show in Overture EcoBlack Matte PLA)
FIll: 20%
Supports (only for the middle ring)
On my own AnyCubic Kobra Max printer I had to:
Resize poles to 99%
Print with a brim
Bed temperature 75 degrees
(your own printer configuration will more than likely vary)
Shown bolted with 2x M430 bolts (PVC clamp) and 2x M414 bolts (clamp to trellis). Zip ties also work
| pvc_2.5inch_clamp.stl | 66.6KB | |
| trellis_base_ring.stl | 608.7KB | |
| trellis_middle_ring.stl | 910.6KB | |
| trellis_pole.stl | 19.4KB | |
| trellis_pole_small.stl | 34.8KB |
