Hydroponic Plant Cultivation Tower Using 100mm Flower Pots 3D Printer Model
The file 'Hydroponic Plant Cultivation Tower Using 100mm Flower Pots 3D Printer Model' is (stl) file type, size is 337.4KB.
The file 'Hydroponic Plant Cultivation Tower Using 100mm Flower Pots 3D Printer Model' is (stl) file type, size is 337.4KB.
You can grow plants by placing a 100mm plant pot.
You can grow plants hydroponically using the NFT transformation ring.
By changing the size of the hole cup ring connected to the main body, pots of up to 120mm can be used.
Insert a rubber band into the bottom of the hole cup ring and secure it to prevent water from seeping in.
Secure the stacked bodies using PVC pipes with an outer diameter of 22 mm through the internal fixing holes.
Depending on the tower height, you can use 7w or 20w to raise the floor.
Originally, the water tank was made using 8L and 12L trash cans.
| 8L-support.stl | 92.9KB | |
| body_2.2-2dn.stl | 606.7KB | |
| cover.stl | 133.5KB | |
| cover_handle.stl | 16.7KB | |
| hole_cup_ring.stl | 240.7KB | |
| nft_hole.stl | 150.3KB | |
| water_1.0.stl | 266.8KB |
