This is works in progress...
for the moment the cup, that you can print without support.... the first number its the diameter the second its the lenght
If you need some other measure, ask me.
My idea is to do also the tower... for the hydroponic at home...
The part for the tower... (in progress) .... here the first tower
for cup diameter 20 https://www.thingiverse.com/thing:3008012
| Cup_20-40_v_1.0.STL | 539.3KB | |
| Cup_25-40_v_1.0.STL | 733.8KB | |
| Cup_30-40_v_1.0.STL | 753.6KB | |
| Cup_30-50_v_1.0.STL | 1.0MB | |
| Cup_35-40_v_1.0.STL | 851.7KB | |
| Cup_35-50_v_1.0.STL | 1.1MB | |
| Cup_35-60_v_1.0.STL | 1.3MB | |
| Cup_40-40_v_1.0.STL | 917.2KB | |
| Cup_40-50_v_1.0.STL | 1.4MB | |
| Cup_40-60_v_1.0.STL | 1.3MB | |
| Cup_45-60_v_1.0.STL | 1.4MB | |
| Cup_50-60_v_1.0.STL | 1.7MB | |
| Cup_len._85___X__d-67__c-X__p-X__v-X.STL | 3.0MB |
