This is a hydraulic powered crane/digger/bucket thing. Not quite sure what to call it. It is powered with Syringes that slide into the holes and attach to to the syringe mounts. I use it as a project in middle school and was built using Solidworks. Really fun project and really fun to use.
Aside from the parts you will be printing, you will need the following items...
10cc Syringes: 10x
Approximately 6-10 feet of Airline tubing
Assorted dowel rods to connect pieces together
| Final_Assemly_-_Arm-1.STL | 59.2KB | |
| Final_Assemly_-_Arm2-1.STL | 45.4KB | |
| Final_Assemly_-_Base-1.STL | 684.0B | |
| Final_Assemly_-_Bracket-1.STL | 39.5KB | |
| Final_Assemly_-_Bucket-1.STL | 29.7KB | |
| Final_Assemly_-_Connecting_Arm-3.STL | 22.9KB | |
| Final_Assemly_-_Connecting_Arm_2-2.STL | 22.9KB | |
| Final_Assemly_-_Pivot_Rod-1.STL | 7.3KB | |
| Final_Assemly_-_Slider_Syringe_Holder-1.STL | 9.7KB | |
| Final_Assemly_-_Slide_Base-1.STL | 4.0KB | |
| Final_Assemly_-_Sub_Base_Assembly-1_Actuator_Bracket-1.STL | 11.8KB | |
| Final_Assemly_-_Sub_Base_Assembly-1_Base_Collar-1.STL | 9.1KB | |
| Final_Assemly_-_Sub_Base_Assembly-1_Gusset-1.STL | 15.9KB | |
| Final_Assemly_-_Sub_Base_Assembly-1_Sub_Base-1.STL | 18.4KB | |
| Final_Assemly_-_Support_Collar-1.STL | 56.8KB | |
| Final_Assemly_-_Support_Rod-1.STL | 8.5KB | |
| Final_Assemly_-_Syringe_Mount_MOD-1.STL | 38.5KB |
