This is a stand for HY300 projector incase you want to adjust the angle of the projector or level it parallel to the ground.
In addition to the main structure, 3 nuts and 3 bolts need to be printed.
You can simply force insert three nuts into the slots at the end of the main structure and use bolts to adjust the angle.
I used Ender 3 V2 with standard set up to print and it works nicely with my device.
You will be able to utilize it to adjust level or angle of different objects with similar dimensions as well.
Enjoy!
Print Settings (Suggested but you can also use any set up)
Rafts:
No
Supports:
Auto
Infill:
10%
| bolt_25x8.stl | 763.4KB | |
| main_structure.stl | 131.8KB | |
| nut_6x9.stl | 474.2KB |
