Hummingbird Feeder Bee Guard – Version 4 (old Style) 3D Printer Model
The file 'Hummingbird Feeder Bee Guard – Version 4 (old Style) 3D Printer Model' is (stl) file type, size is 120.6KB.
The file 'Hummingbird Feeder Bee Guard – Version 4 (old Style) 3D Printer Model' is (stl) file type, size is 120.6KB.
This is a replacement bee guard, old style. It is designed so that it can be printed on a FDM printer. This version must use supports for the base. When printing the cage, print it with the top down. The pieces connect together to form a pressure fit, and should be glued. If you look at it like a clock, just put a drop at 12 and 6 where the two pieces join. This was designed because the other versions I found were single piece models that could not be printed by an FDM printer as a single piece. Either supports could not be removed from inside the cage or the bridging was too much for a FDM printer.
| BeeGuardBase_v4.stl | 99.1KB | |
| BeeGuardCage_v4.stl | 310.7KB |
