Hummingbird Bath Flower Pot Fountain 3D Printer Model
The file 'Hummingbird Bath Flower Pot Fountain 3D Printer Model' is (stl) file type, size is 1.3MB.
The file 'Hummingbird Bath Flower Pot Fountain 3D Printer Model' is (stl) file type, size is 1.3MB.
Inspired by Robbie and Gary Gardening's Youtube Video (https://www.youtube.com/watch?v=25TOl75dbsM).
You'll need a large bowl or flower pot of your choice for the basin, a 6-8 inch plastic flower pot for the riser, and a ~5 watt water pump with ¼" tubing. You'll need to drill a large hole or 2 around the edge of the pot to allow water to flow in and as a place for the power cord to run through, and a ¾ inch hole in the center of the bottom for the hose barb to stick through.
For the riser pot I got an 8 inch Mainstays plastic pot from Walmart. And I used latex tubing because it's what I had on hand, and it's easy to slip on and off the pump end for cleaning but the clear tubing that sometimes comes with the pumps would be fine too.
I primed, poorly painted, and epoxy coated it in an attempt to attract more birds, but I'd just print it in a bright color if I made another.
| BB_Hose_Barb.stl | 882.8KB | |
| Bird_Bath_Bulb_v1.stl | 3.2MB |
