The file 'Humanoid Yoga II 3D Printer Model' is (HEIC,gcode,3mf,stl) file type, size is 51.6MB.
Humanoids doing yoga, because they need it too!
Check out the whole series on my profile.
Print at 100% infill with a layer height of 0.2mm with a base layer of 0.32mm
Use any colors you'd like, either via AMS or by manually swapping filaments as indicated below.
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.8
PLA BambuLab Matte Dark Green Transmission Distance: 3
PLA BambuLab Matte Grass Green Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 3
Swap Instructions:
Start with Charcoal
At layer #3 (0.72mm) swap to Dark Green
At layer #5 (1.12mm) swap to Grass Green
At layer #7 (1.52mm) swap to Jade White for the rest.
Happy printing!
| Humanoid_Human_II.HEIC | 1.2MB | |
| Humanoid_Yoga_II_2h40m.gcode | 14.0MB | |
| Humanoid_Yoga_II_by_TheMazePrinter.3mf | 22.3MB | |
| Humanoid_Yoga_II_by_TheMazePrinter.stl | 95.0MB |
