The file 'Humanoid Yoga I 3D Printer Model' is (gcode,3mf,stl) file type, size is 50.1MB.
Humanoids doing yoga, because they need it too!
Check out the whole series on my profile.
Print at 100% infill with a layer height of 0.2mm with a base layer of 0.32mm
Use any colors you'd like, either via AMS or by manually swapping filaments as indicated below.
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.8
PLA BambuLab Matte Dark Green Transmission Distance: 1
PLA BambuLab Matte Grass Green Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 4
Swap Instructions:
Start with Charcoal
At layer #3 (0.72mm) swap to Dark Green
At layer #5 (1.12mm) swap to Grass Green
At layer #6 (1.32mm) swap to Jade White for the rest.
| Humanoid_Yoga_Front_200x200_PLA_2h4m.gcode | 13.5MB | |
| Humanoid_Yoga_I_by_TheMazePrinter.3mf | 24.8MB | |
| Humanoid_Yoga_I_by_TheMazePrinter.stl | 106.3MB |
