Human Brain Magic 8 Ball 3D Printer Model
The file 'Human Brain Magic 8 Ball 3D Printer Model' is (stl) file type, size is 14.3MB.
The file 'Human Brain Magic 8 Ball 3D Printer Model' is (stl) file type, size is 14.3MB.
Remixed the brain MRI to hold a magic 8 ball.
It supports 3 different sizes of Magic 8 balls. I tested with the 1.5" version in the 50% scaled brain. There are two sizes of brains, one is 50%. For a total of four brains Download the one that matches the diameter of the magic 8 ball you are using. 1.5", 3.3", or 4".
To assemble you can use two 5/16" dowel rods cut to less than 1" in length. This helps with alignment. Orient the magic 8 ball so it will be visible at the bottom. And adhere with a flexible glue like E6000 or a glue gun. I used rubber bands to clamp it closed for drying.
I printed with Geeetech transparent TPU so it would be kind of squishy, In Cura I used the following infill Cross 3D at 20%.
I used the World's Smallest Magic 8 Ball, which wound up being 1 1/2" in diameter.
https://www.amazon.com/gp/product/B01D1WI758
This one is 3.3" in diameter
https://www.amazon.com/dp/B09ZVL3NR3
This one is 4" in diameter
https://www.amazon.com/dp/B085G63Q36
| Brain_8_ball_1.5_50pct_Left.stl | 2.5MB | |
| Brain_8_ball_1.5_50pct_Right.stl | 2.3MB | |
| Brain_8_ball_1.5_Left.stl | 4.6MB | |
| Brain_8_ball_1.5_Right.stl | 4.3MB | |
| Brain_8_ball_3.3_Left.stl | 4.2MB | |
| Brain_8_ball_3.3_Right.stl | 4.0MB | |
| Brain_8_ball_4_Left.stl | 4.0MB | |
| Brain_8_ball_4_Right.stl | 3.8MB |
