Check out github repository:
https://github.com/mcer12/Hugo-ESP8266
There are 3 versions of the top cover. The original I/O one, one with shapes and one clean with no icons for easy remixing, enjoy! And if you like your print, share a photo :)
EDIT: Added stl variants that are 0.2mm larger on the sides in case the standard enclosure doesn't fit
EDIT2: Added a version with holes for 3 magnets for stronger hold, recommended!
EDIT3: Added new cover with dots.
Print settings for best results (cura):
| hugo_base.stl | 85.0KB | |
| hugo_base_3magnets.stl | 103.9KB | |
| hugo_base_larger.stl | 85.0KB | |
| hugo_bottom.stl | 40.7KB | |
| hugo_bottom_3magnets.stl | 47.9KB | |
| hugo_bottom_3magnets_rev2.stl | 35.6KB | |
| hugo_bottom_larger.stl | 40.7KB | |
| hugo_dots.stl | 102.3KB | |
| hugo_top_clean.stl | 83.2KB | |
| hugo_top_clean_larger.stl | 83.2KB | |
| hugo_top_on_off.stl | 124.6KB | |
| hugo_top_on_off_larger.stl | 124.7KB | |
| hugo_top_shapes.stl | 114.7KB | |
| hugo_top_shapes_larger.stl | 114.7KB |
