Hubsan Battery Magazine (holds 11 Batteries) 3D Printer Model
The file 'Hubsan Battery Magazine (holds 11 Batteries) 3D Printer Model' is (SLDPRT,STL) file type, size is 810.9KB.
The file 'Hubsan Battery Magazine (holds 11 Batteries) 3D Printer Model' is (SLDPRT,STL) file type, size is 810.9KB.
This magazine will accept 11 Hubsan-type Li-Ion batteries and slides into a battery bag for additional protection for the stored batteries. There is a small slot on one side that accepts the connector and a larger slot on the other that accepts the battery. The connector is held in place by a keyhole and the battery has a very small amount of friction - just enough so mine stay put but still slide out easily!
I originally designed the battery holder in Solidworks - I've provided the original design along with a rotated STL ready for printing. I was able to print this on a poorly calibrated flashforge FDM printer without supports, although a few of the overhang sections could have probably used it.
Works well with the following battery bag:
Black Menba Lipo Battery Fireproof explosionproof leakproof Safe Bag /Pouch /Sack for Charge & Storage 95x64x50mm (Small)
| battery_holder.SLDPRT | 586.3KB | |
| battery_holder.STL | 643.4KB |
