This is Hubless Bike,
which was produced using Arduino and 3D printing technology.
It's not a perfect bike ride, but it's our content and we're looking forward to creating a creative RC mobile.
I think it will inspire all the makers enough.
It is modeled using Fusion 360 and can be controlled wirelessly with a mobile phone through Wi-Fi communication.
Left, right-hand controls
Speed control
Forward, backward
Headlight Lighting
[Used Hardware Parts]
3DFUNS ESP8266 Board 1x
MG90 Servo Motor – 180 Degree 1x
MG90S Servo (PCB Remove) Motor – 360 Degrees 1x
Neopixel LED 1x
16340 Battery 1x
16340 Battery Case 1x
Tyre 2x
Please refer to our blog and YouTube channel for information necessary for production such as coding source and Fusion 360 modeling video.
https://www.youtube.com/c/3DFUNS
https://youtu.be/bO5XlbHP7Og
https://blog.naver.com/3dfuns/222492958136
We ask for your continued interest and support.
Thank you.
| autobike_bracket_headlight.stl | 1.3KB | |
| autobike_cap_fuel.stl | 46.4KB | |
| autobike_fixed_steering.stl | 24.9KB | |
| autobike_frame_handle.stl | 41.1KB | |
| autobike_frame_main.stl | 1.4MB | |
| autobike_handle.stl | 343.9KB | |
| autobike_handle_gear.stl | 134.0KB | |
| autobike_handle_gear_middle.stl | 287.6KB | |
| autobike_headlight_back.stl | 41.5KB | |
| autobike_headlight_front.stl | 147.9KB | |
| autobike_saddle.stl | 332.9KB | |
| autobike_servo_gear.stl | 452.8KB | |
| autobike_servo_handle_gear.stl | 327.8KB | |
| autobike_skin_left.stl | 379.2KB | |
| autobike_skin_right.stl | 349.3KB | |
| autobike_spacer_handle.stl | 15.7KB | |
| autobike_wheel_back_in.stl | 88.4KB | |
| autobike_wheel_back_in_l.stl | 114.9KB | |
| autobike_wheel_front.stl | 136.8KB | |
| autobike_wheel_front_in.stl | 148.5KB | |
| autobike_wheel_front_in_l.stl | 151.4KB | |
| autobike_wheel_gear.stl | 529.0KB | |
| bike_plate_stand.stl | 149.1KB | |
| lego_67mm_tire.stl | 562.4KB |
