HTC Vive Focus 3 Wall Mount 3D Printer Model
The file 'HTC Vive Focus 3 Wall Mount 3D Printer Model' is (stl) file type, size is 173.1KB.
The file 'HTC Vive Focus 3 Wall Mount 3D Printer Model' is (stl) file type, size is 173.1KB.
Since I couldn't find a wall mount for the HTC Vive Focus 3, I decided to design one myself. This wall mount can be bolted to a wall or, as shown in the photos, to the back of a closet.
The design features three M5 holes in the middle with standard clearance and countersink cuts. On the back, there are two additional M5 holes with close clearance and countersink cuts. These two holes have a depth of 120 mm. You can use two threaded M5 rods, weld them to a custom back plate, and attach them to the 3D print for extra support. The back plate is shown in the third picture.
Finally, the headset can be placed on the mount either with the rear cushion or the face cushion. In the second picture, you can see the headset resting on the wall mount with the face cushion. The arc of the wall mount is large enough to cover the lenses of the headset.
| HTC_Vive_Focus_3_wall_mount.stl | 540.9KB |
