HTC Vive Adjustable Angle Wall Mount For Lighthouse/Base Stations 3D Printer Model
The file 'HTC Vive Adjustable Angle Wall Mount For Lighthouse/Base Stations 3D Printer Model' is (stl) file type, size is 941.6KB.
The file 'HTC Vive Adjustable Angle Wall Mount For Lighthouse/Base Stations 3D Printer Model' is (stl) file type, size is 941.6KB.
Designed to be used with my quick-swap wall mounts, but can be mounted to the wall on their own if desired. Holes in the baseplate are sized for M5 screws. No supports are required as I have placed supports for the holes during modeling - they can simply be snapped off using pliers once printing is complete.
This design was closely modeled off of the original wall mount kit that comes with the Vive. If you still have the original hardware, I'd recommend using that but if you have extra base stations this is an easy way to mount more.
You will require a 1/4 thread 2" long bolt to attach the base stations, and either a 1/4 wingnut or regular nut to tighten the base station up against. I have created a press-fit shroud for a regular 1/4 nut that can replace a real wingnut just fine.
To mount the baseplate to the wall, use either M5 screws or command strips, or attach it using my quick swap wall mount kit found here: https://www.thingiverse.com/thing:4558734
| Ball_Joint.stl | 360.7KB | |
| Ball_Retainer.stl | 1.3MB | |
| Lighthouse_Base.stl | 662.0KB | |
| Wingnut.stl | 146.6KB |
