Description Files (23)

Summary

New generation of the HPD!

"To finish first, first you have to finish". One big problem with a 3D printed car is durability so the most important changes made have been with the aim to increase this. This has made that the weight of the car (mine is 1130g) is now above minimum weight (1050g). The added weight is not optimal but also not only bad as it is easier to get suspension to work well on a heavier car and acceleration is depending on good traction.

More improvements:

More narrow chassis to avoid it touching the ground when cornering.
Better differential.
Front wing is now using standard mounting holes (a close approximation to the not so standard standard) so you can use wings from Tamiya, Mon-tech, Serpent or use HPD wings on other F1 cars.
Front and rear wing are made with attention to aerodynamic rules.
Body is not needing clips for mounting.
Body is nicer looking.
Quick release battery clamp
Rear damper mount is now on a separate plate which makes it easier to adapt to different length dampers.
Nose cone is now screwed on place.

Battery_clamp.stl	28.6KB
body.stl	1.5MB
cable_guard.stl	14.3KB
Cradle.stl	182.4KB
front_arm.stl	152.9KB
Front_chassis.stl	1.4MB
front_damper_mount.stl	40.0KB
Front_wing.stl	3.0MB
indrive-universal.stl	84.8KB
main-chassis.stl	170.0KB
nose.stl	163.8KB
outdrive-universal.stl	120.6KB
pivot-clamp.stl	30.3KB
rear-damper-mount.stl	52.2KB
Rear_axle.stl	11.4MB
Rear_wing-X.stl	63.3KB
Skid_plate.stl	46.6KB
Spring-holder-xray.stl	63.2KB
Spring-holder.stl	65.3KB
stab.stl	32.7KB
steering-hub.stl	68.0KB
wheel_hex.stl	88.7KB
Wing_adapter.stl	29.6KB

HPD F1 V2.0 A Competition Legal R/C Car 3D Printer Model

Summary

New generation of the HPD!

Tags

You might also like