This dust cover is designed based on the HP LaserJet Pro P1102 series. It has not been tested with other models.
It aims to extend the life of the printer by preventing dust from settling on the paper, which can scratch the drum during printing.
For an elegant touch, you can use transparent filament! In this case, you will need to set the fill rate to 100%.
After printing the model, I noticed that when the A4 paper was placed in the tray, the paper reached the very edge and was not perfectly aligned, so I made a small adjustment to the model to ensure a perfect fit.
To avoid reprinting my own cover, I trimmed the printed cover a bit, and it worked fine. But I'm sure your print will be even better :)
| Hp_LaserJet_Pro_P1102_Dust_Cover.3mf | 451.0KB | |
| P1102_Dust_Cover.stl | 140.5KB |
