Howl’s Moving Castle 3D Printer Model
The file 'Howl’s Moving Castle 3D Printer Model' is (stl) file type, size is 45.9MB.
The file 'Howl’s Moving Castle 3D Printer Model' is (stl) file type, size is 45.9MB.
The Castle from the movie Howl's Moving Castle. If you haven't seen it, again I recommend you do.
The largest file "HMC To.stl" measures 207, 111 with a height of 194 mm. I printed this file without supports. At .15 mm layer height, the file took about 44 hours to print.
The only file I used supports on are the ears.
You can try to reduce the scale some if want. Check all of the parts in your slicer to make sure they will print first.
Don't forget Calcifer and Turnip Head!
https://www.thingiverse.com/thing:2068085
https://www.thingiverse.com/thing:2069541
Designed in Zbrush. Assembled height 250mm. Assembled weight 490g.
| HMC_Base.stl | 46.1MB | |
| HMC_Ears.stl | 6.5MB | |
| HMC_Eyes.stl | 7.9MB | |
| HMC_Feet.stl | 15.9MB | |
| HMC_Mortar_and_Pestle.stl | 1.1MB | |
| HMC_Tongue.stl | 4.1MB | |
| HMC_Top.stl | 93.0MB | |
| HMC_Wings.stl | 11.9MB |
![Slinky [Toy Story] 3D Printer Model](https://res.3axis.co/ffd959c8-2302-41a1-8513-dd7a610a34b2/images/25cc1f87-4dd0-4aad-85c3-6b7012958ed5_thumb.jpg)
