Housing For DCC-Ex Central Unit (9mm Gauge N, TTm, H0e) 3D Printer Model
The file 'Housing For DCC-Ex Central Unit (9mm Gauge N, TTm, H0e) 3D Printer Model' is (stl) file type, size is 2.2MB.
The file 'Housing For DCC-Ex Central Unit (9mm Gauge N, TTm, H0e) 3D Printer Model' is (stl) file type, size is 2.2MB.
I built a DCC-EX central with Mega 2560 Board, L298HN Motor Shield and ESP-01 WiFi module from a parts kit.
To be used with my small 1/120 scale narrow gauge TTm railway, a 9mm gauge programming track (Trix 4904) is added. But you can use the blank variant for another gauge.
It's printed on my Ender 3v2 with no supports and for lettering a stop was added when printing the top cover after the first layer of the letters and the color change was done without purging filament. I used threaded M3x4 inserts and cable ties as strain relief.
The Wifi card is mounted with 2 M1.7 screws and hot glue.
You are free to adapt my STLs according your needs. It's just a case.
If you want to support somebody, you support the DCC-EX project, it's not my project, but I like it.
FYI: The rail car at the picture isn't digitalised yet but I will build a digital version soon.
| Housing_for_DCC-EX_central_unit_-_adapter_trim_strip.stl | 1.1MB | |
| Housing_for_DCC-EX_central_unit_-_cover_blank.stl | 1.9MB | |
| Housing_for_DCC-EX_central_unit_-_cover_neutral.stl | 1.7MB | |
| Housing_for_DCC-EX_central_unit_-_main.stl | 5.0MB |
