House Number Plate Dice 3D Printer Model
The file 'House Number Plate Dice 3D Printer Model' is (stl) file type, size is 207.3KB.
The file 'House Number Plate Dice 3D Printer Model' is (stl) file type, size is 207.3KB.
Door number plaque in the style of a D20 dice.
Prints at 160mm x 184mm without scaling.
Keyhole slot for easy screw mounting.
Includes numbers 0123456789 in the VECNA font from: https://www.dafont.com/vecna.font
0) Use nice contrasting colours!
1) Print the BASE, MESH, and BORDER.
2) Superglue BORDER to the BASE
3) Superglue the points of the equilateral of the MESH to the BASE, allow to dry.
4) Gently bend the other parts of the MESH to fit the BASE, superglue in place.
4b) The ends of the MESH may need trimming slightly with a knife (or scissors) so they fit, It depends on the accuracy of your printer. - The mesh is only 1mm thick, so cuts easily.
100% original design by myself.
All files checked, zero errors.
NO SUPPORTS NEEDED
| Door_Number_-_0.stl | 82.3KB | |
| Door_Number_-_1.stl | 29.6KB | |
| Door_Number_-_2.stl | 72.7KB | |
| Door_Number_-_3.stl | 107.5KB | |
| Door_Number_-_4.stl | 62.0KB | |
| Door_Number_-_5.stl | 112.4KB | |
| Door_Number_-_6.stl | 92.3KB | |
| Door_Number_-_7.stl | 41.9KB | |
| Door_Number_-_8.stl | 160.4KB | |
| Door_Number_-_9.stl | 115.7KB | |
| Door_Number_-_Base.stl | 22.4KB | |
| Door_Number_-_Border.stl | 10.5KB | |
| Door_Number_-_Mesh.stl | 22.1KB |
