House Lannister HueForge 3D Printer Model
The file 'House Lannister HueForge 3D Printer Model' is (stl) file type, size is 21.5MB.
The file 'House Lannister HueForge 3D Printer Model' is (stl) file type, size is 21.5MB.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200.5x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA Paramount 3D Iron Red Transmission Distance: 3
PLA Protopasta Good as Gold Transmission Distance: 5
This print uses 2 unique filaments
Swap Instructions:
Start with Iron Red
At layer #15 (1.28mm) swap to Good as Gold for the rest.
| House_Lannister_Front_201x200.stl | 96.2MB |
