House Greyjoy HueForge 3D Printer Model
The file 'House Greyjoy HueForge 3D Printer Model' is (stl) file type, size is 21.2MB.
The file 'House Greyjoy HueForge 3D Printer Model' is (stl) file type, size is 21.2MB.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Protopasta Good as Gold Transmission Distance: 5
PLA Default White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Good as Gold
At layer #24 (2mm) swap to White for the rest.
| House_Greyjoy_Front_200x200.stl | 95.9MB |
